Tips & Tricks
Storing your Trumps
From a single instrument to an entire collection, how you
store and transport your Trumps is important!
No one wants their instruments broken... or in an accident-waiting-to-happen circumstance.
Given proper storage, care and maintenance, most trumps can last for many years. Storage
methods can be as simple as a notched block of wood (fig.1), or as convenient as utilizing
some found object (fig.2), to constructing your own elaborate one-of-a-kind storage
system.
Here are some examples:
Fig.1 - Simple holders
(Constructed from blocks of wood thick enough to protect
the trigger. Simply notch the center of each end 90 degrees apart to store as many as four
trumps per block. Secure with a rubber band.)
Fig. 2 - Trump kit from half of a chess set
(An old chess set deep enough to close without damaging the trump's triggers.
Some non-toxic foam or bubble-wrap may be placed inside to prevent the instruments from
falling when set vertically.)
Fig. 3 - Mark's old traveling Trump and percussion
kit in a toolbox
(By positioning the wood boxes so the lids slide open to the center, I have
shelves to lay out the most used 'harps for the gig. My drumstick pouch lays on top to
keep things from moving when the case is vertical. A bit of non-toxic foam in each wood
box keeps the trumps in place.)
Fig. 4 - Szilágyi chromatic set box
(Trumps are stored on their sides with the triggers overlapping. A bit of
non-toxic foam keeps them in place.)
Fig. 5 - Cigar box gig kit
(with room for a chromatic set of BlackFires, plus harmonicas, kazoo, Clackamores and
misc. Everything needed to make it through a jam session.)
Fig. 6 - Whitlow Case
(Whitlows come in a plastic case cushioned by non-toxic foam. This is fine for turmps with
short triggers. The plastic does not hold up to being dropped however.)
Remember to always:
Clean your trumps often. A "burnishing wheel"
such as found in Dremel tool kits (or any hardware store) works great to remove oxidation
and such. Be very careful (don't rub too hard), rinse in clean water to remove the remnant
dust, and dry thoroughly with a clean cloth. Some trump makers use an oil-based coating
to prevent oxidation. They suggest using only soap and water... no alcohol.
Keep a bag of desiccant (moisture absorber) in your kit,
especially in humid environments, to prevent oxidation. Change it often. (Desiccant
can be found in many boxes that have shipped electronic components and other items... it's
the stuff that says "Do Not Eat.")
|
